← All news
NATO

NATO Engine: second call for innovators who need manufacturing capacity

On 17 November 2026 the NATO Support and Procurement Agency (NSPA) published the second call under the NATO Engine pilot project, a Request for Information (RFI 2) aimed at companies that have a finished defence or dual-use product but lack manufacturing capacity. Responses go exclusively through the NSPA online questionnaire, by 31 December 2026.

19 November 2026 · 5 min read

What NATO Engine is

NATO Engine is a new network that NATO Secretary General Mark Rutte presented on 7 July 2026 at the Ankara Summit as part of the NATO Innovation Scale-Up Package. The reason is simple: no single Ally has the industrial capacity to meet the large and growing demand, particularly for air defence and strike capabilities.

The network works under a „contractor- or factory-for-hire“ model. On one side are manufacturers and factories with spare or flexible capacity, civilian plants included; on the other, companies, in particular non-traditional suppliers and SMEs, that have no factory of their own or not enough capacity to deliver their product in sufficient quantities. The pilot has been running since July 2026 and is managed by NSPA. Its initial focus areas are additive manufacturing, engineering services and manufacturing-as-a-service.

In the first call (RFI 1), which closed on 27 August 2026, NSPA collected the supply side. According to NATO Director of Innovation Nikos Loutas, more than 1,100 responses came in, around 80 % from the civilian sector. The Permanent Delegation of the Czech Republic to NATO reports 1,123 companies from 29 Allies. Supply and demand will meet on a digital platform built on NSPA’s existing RAPiD-e system (Repository for Additively manufactured Products in a Digital environment). The first version of the platform is due in the first quarter of 2027; the Czech Delegation to NATO indicates February 2027. The Conference of National Armaments Directors (CNAD) is to evaluate the pilot’s results in the first quarter of 2028.

What RFI 2 is and who it is for

The second call targets the demand side. NSPA wants to compile a list of innovative companies and production-ready companies seeking manufacturing capacity or manufacturing services, assess them and list them on the NATO Engine platform. The notice, reference 26PAM013, is published on NSPA eProcurement and is also accessible through the NATO Front Door for Industry, NATO’s new single entry point for industry.

Companies from NATO nations, Ukraine and Indo-Pacific partner countries may respond if their product can deliver a meaningful defence solution, whether purely defence or dual-use. The platform is to offer capacity in areas including additive manufacturing and 3D printing, aerospace, automotive, digital engineering, electronic manufacturing services, mechanical engineering and metalworking.

In the RFI document NSPA sets out four aims: identify companies with a defence-relevant product that are seeking capacity; review, approve and publish them on a secure platform where they gain access to manufacturers; enable B2B matchmaking between factories and companies; and engage selected companies in further exchanges with NATO and Allies on augmenting defence production. Listing is not automatic; NSPA assesses every response. The nation where a company is domiciled may ask for its information to be anonymised on the platform.

How to respond

The only route is the online questionnaire on the NSPA website. Responses sent by e-mail are not considered. The deadline is 31 December 2026. The questionnaire has six parts:

  1. Company: legal name, registration and VAT numbers, website, point of contact, size (up to 50, 51 to 500, more than 500 employees), company description up to 150 words, sector and affiliation with a NATO or Allied innovation programme (DIANA, NATO Innovation Fund, national programme, accelerator). The NCAGE code is optional.
  2. Product: the technology or product category you want to scale (up to 30 words), a description of the product or service up to 100 words without classified or sensitive technical details, production status, TRL, expected production start, whether the need is one-off, recurring or scalable, volume, and whether you already have a customer, order, grant or contract.
  3. Production need: type of arrangement (prototype manufacturing, pilot production, contract manufacturing, manufacturing-as-a-service, licensing), type of manufacturing, main reason for seeking external capacity, up to three most important partner selection factors, preferred country or region, target cost, and interest in a third party (prime contractor, integrator, consulting firm).
  4. Manufacturing processes and certifications: for example CNC machining, casting, forging, composites, electronic and PCB assembly, harnesses, metal and polymer additive manufacturing, surface treatment, testing; required certifications such as AQAP, ISO 9001, EN 9100 or IATF 16949.
  5. Security, intellectual property and data: whether you require an NDA before sharing further information and whether the manufacturing partner must hold a security clearance.
  6. Consent: to display your information on the platform, to full or limited profile visibility to approved manufacturers, and to being contacted by manufacturers, optionally only after you approve each introduction.

Practical advice: write the three word-limited texts (150, 100 and 30 words) in advance, because they decide how manufacturers will see you on the platform. If you are part of NATO DIANA Accelerator Czechia or another programme, state the affiliation in the questionnaire.

What NATO Engine is not

An RFI is not a Request for Proposal: NSPA is not buying anything and a response gives no entitlement to a contract. NATO, NSPA and Allies take no part in matching companies; all commercial relationships formed through the network are strictly B2B and NATO accepts no liability for their outcome. Contracts, pricing and regulatory obligations, including export licences, remain with the companies.

What it means for Czech companies

For Czech start-ups and SMEs with a finished product this is the first NATO tool that addresses the step from prototype to series production, the point where many dual-use companies lose momentum. The benefit is access to vetted factories across the Alliance and the ability to look for capacity windows that fit your lead time, backlog and production stage.

Note that this call is for companies that need production. The call for manufacturers with spare capacity (RFI 1: metalworking, 3D printing, assembly) closed on 27 August 2026 and is marked closed on NSPA eProcurement. According to NATO’s Director of Innovation in October 2026, further manufacturers will be able to register once the platform is live in 2027; NSPA has not yet published an official confirmation or date. We will share it as soon as it does.

Defence Hub CzechInvest helps companies responding to RFI 2 free of charge: we will review your product and production-need descriptions with you so that manufacturers and NSPA understand you. Write to defencehub@czechinvest.org.

Downloads

We have summed up the call on one A4 page, including what to prepare for the questionnaire. The NSPA instruction document for RFI 2 is attached to notice 26PAM013 on NSPA eProcurement.

Sources and links

Status as of 19 November 2026.